Concrete cutting in Rogers AR - clean cuts and a quote that says what's included
Need a broken section of driveway or patio out, or a trench cut through a slab? We saw clean lines so the rest stays put.
What a concrete cutting job really includesbefore you hire anyone in Rogers
Most calls for concrete cutting in Rogers start with a piece of slab that has to go, like a cracked driveway panel, a strip for a new walk or a trench for a pipe under the garage. We saw straight through along lines we mark, so that section comes out without breaking the concrete you're keeping.
Before the blade goes in, I ask what might run through or under the slab and we get utility lines marked, because hitting a pipe or wire turns a simple cut into a repair. I'd rather spend that time up front than spend it fixing something later.
Price moves with how many feet we cut, how thick the slab is, whether there's rebar, the steel rods laid inside for strength, and whether you want the pieces hauled off. The schedule turns on getting lines marked and, for cuts at the street or curb, a city permit we file for our part. Your estimate lays all of it out.
You'll know what we're cutting, what's coming out and who's hauling it before we start, so give us a call at (479) 413-0106.
Concrete cutting jobs we take on
The saw and the plan change with what we're cutting, how thick it is, what might be buried in it and whether we're working outside or inside your house.
Driveway and patio sections
We saw out cracked or sunken panels along straight lines so new concrete ties in cleanly, and concrete driveway building or concrete patio construction takes it from there.
Trenches through slabs
A narrow trench cut lets a new pipe or line run under a garage or basement floor, and we ask what's already inside the slab before we start.
Indoor slabs and walls
Cutting inside a garage, basement or house means planning around fresh air and setup, so it looks different from a driveway job out in the open.
Why folks hire CJ Rogers Concrete Companyfor concrete work around Rogers
I'd rather talk the whole job through at your place than have you surprised later, so you'll know what gets cut, what goes and what's left before we start.
I write your estimate myself
I'm the one who comes out, looks at the cut with you and writes it up, so the person pricing your job is the one answering for it.
Our own crew, with me there
The sawing is done by our own crew, not somebody we hand the job off to, and I'm out on the job with them.
In business since 2013
I started this business in 2013 after years of fixing settled and cracked concrete at rental properties, so I've seen what a careless cut leaves behind.
Fully licensed and insured
We're fully licensed and insured, and I'm glad to go over that at the estimate so you're not just taking anyone's word for it.
Backed by our satisfaction guarantee
Our cutting work is backed by our satisfaction guarantee, and if something about the job bothers you, I'm the one you talk to about it.
A concrete cutting and removal quotefrom CJ Rogers Concrete Company
Tell us where the cut is, roughly how long, slab or wall, and whether you want the pieces hauled. We'll get back to you within one business day to set up a free on-site estimate, no pressure to book.
From call to clean cuthow a job runs with us
We keep it simple. You talk with me at your place, get it all in writing, and know who's doing what before anybody fires up a saw.
You call or send the form
You call or fill out the form with where the cut is and what needs to come out, and we set a time for me to come see it.
I look at it with you
I come out, look at the spot with you and ask how you'll use it afterward, then write an estimate that spells out the cutting, breaking up, hauling and prep.
We set a date and get ready
Once you say go, we set a date, take care of any permit work on our part and ask which outdoor tap and outlet we can use, since the saw needs water and power.
Our crew makes the cuts
Our own crew saws along the marked lines with me on site, and if removal is in the quote, we break up the pieces and haul them off.
We walk it together
When we're done, we walk the job with you so you can see the edges and know how to look after the concrete that's left.
Concrete cutting questions
How much does concrete cutting cost in Rogers, AR?
Professional saw cutting of concrete slabs usually runs about $4 to $10 per linear foot across the US, and that's for the sawing, not breaking up or hauling. Reinforced or thicker slabs and wall sawing usually cost more per foot, and a short cut may be priced by a minimum charge instead of the foot rate. Your estimate from me spells out exactly what's included.
Does the concrete cutter haul the pieces away after cutting?
Not always, because sawing and removal are separate jobs and some cutters leave the cut panels right where they sit. Breaking up, lifting, hauling and dump fees can add more than the sawing itself, so compare quotes that cover the same work. When I write yours, I'll say plainly whether hauling is in it.
Do I need a city permit to cut a curb or sidewalk in Rogers?
Yes, if the cut is in the public right-of-way, the strip along the street that belongs to the city. The Rogers Department of Community Development issues a permit for cutting a street, curb, sidewalk, trail or other paved surface there, and the contractor has to be licensed to work in Rogers and post a bond with the department. A curb cut for a driveway goes through the city's driveway and access permit instead, with no second permit or bond, and when we're the contractor we handle the filing and inspections for our part.
Do I need to call 811 before cutting or digging out concrete in Arkansas?
Yes, state law requires contacting Arkansas 811 before any digging or demolition, and member utilities then mark their lines within two full working days, so that wait goes into the start date. They only mark their own lines, though, and as a rule of thumb anything behind the meter counts as your private line. Tell us what you know about lines running to a shed, sprinkler or outbuilding.
What is the best way to cut concrete inside a house or garage?
Pick the saw before anything else. A concrete sawing trade group's guide says engine-powered saws used indoors need adequate ventilation and air circulation, which the owner has to provide, and it names electric, hydraulic and air-powered saws as other options. Before we set up inside, we'll talk with you about which saw we bring.
How do I find out what's inside a concrete slab before it's cut?
Structural or post-tensioned concrete, which has steel cables pulled tight inside it, may need a scan before cutting to find rebar, those cables, conduit, pipes and anything else in the way. If your slab is that kind, plan for the scan before the saw starts. On any job, I'll ask what you know about the slab first.
Concrete cutting around Rogers, AR
We're based in Rogers and take cutting jobs in plenty of the cities around it, like Bentonville and Springdale, where we see lots of driveway and sidewalk cuts near the street. Pick your city below or give us a call.
Get your concrete cutting estimate in Rogerswith the owner out on the job
If new concrete is going back where the old comes out, we can plan the concrete cutting and the pour together, so one crew handles both. Call (479) 413-0106 or use the form for a free estimate.